Tips and Tricks When The Computer Suddenly Not Working

You see!!! Some times our computer suddenly just not function, error, blue screen, hang, they just can load OS such a windows, linux or even Mac, they just can appear on the monitor. If you ever hear or probably thats happen to your computers, don't be panic, just read this tips from Inside The Computers belows.

Some times what makes that happen is because dirty. We are too lazy to clean our computers, so dust every where.

first, try to clean every elements inside the computers, such as Dimm (SDRam, DDram, RDRam) depend whats in your computer, soundcard (if not onboard), VGACard, and processor (becareful when you loose them) place them on save places. second try to brush them with alcohol (60-70%) using toothbrush (smooth). Third, let them dry. and then when you are sure they already dry, then you put them back again to their place. after that, you can try to turn on your computers. Mostly this is work if there is no physically broken.

CAN YOU FIX YOUR OWN HARD DRIVE? I CAN!

That's the question that my friend always ask to me, and I think it's time for me to show that I can fix my own hard drive too, of course I only fix a bad sector or the modules only, not physically such as a motor or the disc it self.

If we have a bad sector hard drive, we still can used it. how ? if we have software (freeware software) mhdd (you can download it at http://www.mhdd.com/).
1. we must boot from DOS (we can have it on cd win98 setup)
2. after we have C:> then we type mhdd (C:> mhhdd) and then press enter
3. after we allready inside mhdd we detect the hard drive first by pressing F2, than we check it by pressing F4. while checking we can see through where the broken drive or bad sector.
4. if we know where the position of bad sector is, we just type erase (still on mhhd) we just have to fill where we want to start to erasing then fill where we have to stop erasing.
5. after this step done, we go back check that drive by pressing F4 and then F4. If our hard drive not physically damage, I'm sure that hard drive allready fix it.

Note :
if we have any important's document on hard drive that we want to repair, we have to back up them first, because if doesn't they will lost for good. I think that's all for now from Inside The Computers, because I've been thinking how to go more further and further but I stuck in this place.

Clean The Computers Frequently

Yesterday suddenly the PC on the office is Error, the PC wont display to the monitor and there is beep sound when I turn on the PC. What they worry about is not the PC but the data inside it. I do understand how much valuable the data for the office, for the factory. So, they call me to repair the PC at the office.

After I open the computer case and clean all the board and everything inside the PC case, including VGA Card, Sound Card, LAN Card using a brush, wait for few minutes and install all the hardware that I removed before properly to the board then I turn the PC on.

The result is, the PC is now cured, the PC is now display to the monitor again, in other words there is no problem with the PC now. So, what is the problem that make the PC wont display and have a beep sound? Sometimes we only use the computer without take care of it. We don't clean it frequently, we doesn't know if the dust is can make rust and do a damage to the PC. So, Inside The Computers will give you an advise, why don't we Clean The Computers Frequently from the dust.